SGS Sommerer Grubenheber

Gearbox lifts for universal use

The gearbox lifts are designed as floor-running and suspended models. They show a robust finish with high structural stability.

 

pit jack


Telescope universal pit lifts TKS

Control unit:
hydr.-pneum. with air motor
Stroke: 1200 mm
Lifting capacity:
14,5 t and 20,0 t
Chassis: freely movable / rail-guided on the pit floor
  • 2-stage telescope pit lift
  • low height and maximum stroke
  • universal all-rounder
  • smooth running
gearbox lift


Telescope universal-pit lifts TKS-HS

Control unit: hydr.-pneum. with/without air motor
Stroke: 1200 mm
Lifting capacity:
14,5 t /14,5 t and 20 t / 20 t
Chassis: suspended, rigid or adjustable
  • 2-stage telescope pit lift
  • low height and maximum stroke
  • universal all-rounder
  • especially suitable for gearbox and assembly removal

 


 

gearbox jack


Telescope universal pit lifts TKT

Control unit: hydr.-pneum. with/without air motor
Stroke: 1100 mm
Lifting capacity:
2 t, 4 t and 6 t
Chassis: freely movable on polyamide rollers
  • robust and steady
  • suitable for safe gearbox and assembly removal
  • strong construction
gearbox jack


Gearbox lifts TKT

Control unit: hydr.-pneum. with/without air motor
Stroke: 1100 mm
Lifting capacity:
2 t, 4 t and 6 t
Chassis: suspended, rigid or adjustable
  • very robust and movable
  • suitable for safe gearbox and assembly removal

 

Gearbox lifts and their function.

Universal gearbox lifts are used for a quick removal of gear boxes or other elements. They are built in suspended or floor-running versions. All gearbox lifts work fully hydraulic and are available with and without air motor. There is a special system in which piston rod and cylinders are all the time surrounded by oil and by the way protected against corrosion. The polished and hard chrome-plated piston rods and pump pistons provide a long lifetime. The gearbox lifts are robust and of high stablility. The models telescope all-purpose pit lift TKS and telescope all-purpose lift TKS-HS are characterized by a very low construction height and a high stroke at the same time. They can be used for all purposes due to their high loads from 14,5 t to 20 t. The models telescop gearbox lift TKT and gearbox lift TKT-HS are used as special gearbox lifts. They range from load capacities of 2, 4 and 6 t.