PDF  | Print |  E-mail

Telescope all-purpose pit lifts TKS

The telescope all-purpose pit lift TKS is characterized by very low construction height and simultaneously high stroke.

 

pic overview tks 14 1200 Z neu2

 

pic tks 14 1200 fvneu3

 

pic tks 14 1200 fvqneu

 

Control unit: hydr.-pneum. with / without air motor
Stroke: 1200 mm
Lifting capacity:

14,5 t und 20 t

Chassis: freely movable / rail-guided on pit-floor


TKS – the all-purpose lift for your truck and bus workshop and your inspection pit
  • 2-stage telescope pit lift
  • low height and maximum stroke
  • all-purpose use
  • smooth running
  • for service, inspection and testing
  • supplement for wheeled gripping equipment and hoists
  • robust finish
Technical details
  • 14,5 t bzw. 20 t lifting capacity over the entire 1200 mm lifting height
  • quick and safe removal of all assemblies from below
  • pneumatic quick lift until the load is supported and forced post return of both telescope cylinders for shorter cycle times
  • foot operation for quick lifting and load lifting
  • fully hydraulic operation
  • piston rod and cylinders polished and hard-chrome plated
  • chassis freely movable on polyamid rollers, self-locking when holding a load over 1,2 t
  • or rail-guided in L-or U-profiles with needle bearing rollers
Chassis
  • the free movable chassis (FV) allows to move the pit lift inside and outside the pit
  • the free and sideways in the carriage movable chassis (FV-Q) allows to move the pit lift in addition sideways in the carriage.
  • the chassis (Z) guides the pit lift on rails with  L- and U-profiles on the bottom of the pit
Series
TYPE LIFTING CAPACITY
Stroke EXECUTION
TKS 14/1200 FV 14,5 / 14,5 t 1.200 mm freely movable
TKS 14/1200 FV-Q 14,5 / 14,5 t 1.200 mm

freely movable and sideways in the chassis

TKS 14/1200 Z 14,5 / 14,5 t 1.200 mm rail-guided on the bottom of the pit

 

TKS 20/1200 FV 20,0 / 20,0 t 1.200 mm freely movable
TKS 20/1200 FV-Q 20,0 / 20,0 t 1.200 mm

freely movable and sideways in the chassis

TKS 20/1200 Z 20,0 / 20,0 t 1.200 mm rail-guided on the bottom of the pit

The series universal telescopic pit lifts TKS are also available in suspended execution without air motor  (Type TKS-HS) or
with air motor (Type TKS-LM-HS) for 14,5 t and 20,0 t lifting capacity.

Accessories
TYPe PRODUcT Description Application

ATL 14

cross member for 14 t

200 -  900 mm adjustable

trucks, buses, municipal vehicles

ATL 20

cross member for 20 t

200 -  900 mm adjustable

trucks, buses, municipal vehicles

ATB 14

cross member for 14 t

200 -  1040 mm adjustable

buses, trucks

ATB 20

cross member for 20 t

200 -  1040 mm adjustable

buses, trucks

ATB-NF 11

cross member for 11 t

200 -1080 mm adjustable

low-frame buses

ATB-V 16

cross member for 16 t

900 -1500 mm adjustable

low-frame buses, EvoBus etc.

GP 4

gearbox plate

520x350 mm, 45° und 10° pivotable, 
with wooden chock and retainer straps

gearboxes, assemblies

GP 4A

gearbox plate

700x500 mm, 45° und 10° pivotable, 
with elastomere rest and retainer straps

gearboxes, assemblies

AEF 14

support bridge for 14 t

one-sided open

trucks, buses for one axle

AEF 20

support bridge fo 20 t

one-sided open

trucks, buses for one axle

AEV 14

support bridge for 14 t

one-sided open,adjustable

trucks, buses for one axle

AEA 14

support bridge for 14 t

closed

trucks, buses for one axle

AEA 20

support bridge for 20 t

closed

trucks, buses for one axle

ABT LKW 14

support system for 14 t

for lifting and supporting

trucks, buses for one axle

ABT LKW 20

support system for 20 t

for lifting and supporting

trucks, buses for one axle

ABT NF Bus

support system for 11 t

for lifting and supporting

low-frame buses for one axle

AEFK 14

support system for 14 t

for lifting and supporting

trucks, buses, municipal vehicles for one axle

PRG150 carrying plate with rubber surface Ø 150 mm trucks, buses  6-14 t

 

The telescope all-purpose pit lift TKS and its characteristics

This telescope all-purpose pit lift TKS can be used for all purpose. It can be used for repair, maintenance, for working in the inspection pit and for the gearbox removal. As a 2-stage telescope pit lift the telescope all-purpose pit lift has 14,5 t or 20 t load capacity over the entire 1200 mm lifting height. The hydraulic- pneumatic forced post return of both telescope cylinders for shorter cycle times.  The floor-running telescope all-purpose lift has an air motor and pedals for quick and load lifting. Hands are not used for lifting and can be used for working at the vehicle. The free movable chassis (FV) allows to move the pit lift inside and outside the pit and the pit lift can be parked in a niche of the pit. The free and sideways in the carriage movable chassis (FV-Q) allows to move the pit lift in addition sideways in the carriage. The chassis (Z) guides the pit lift on rails with L- and U-profiles on the bottom of the pit. The telescope all-purpose pit lifts TKS –FV and FV-Q and the gearbox lift TKT are freely movable on polyamid rollers and self-locking at 1,2 t load.The chassis (Z) guides the pit lift on rails with L- and U-profiles on the bottom of the pit.

 

Diese Webseite verwendet Cookies, um eine bestmögliche Funktionalität zu gewährleisten. Wenn Sie unsere Webseite nutzen, stimmen Sie der Verwendung von Cookies zu. Ich stimme zu.