Gearbox lifts TKS with high stroke

The telescope all-purpose pit lift TKS is characterized by very low construction height and simultaneously high stroke.

 

gearbox jack floor-running

gearbox jack rail guided

gearbox jack hanging

Control unit: hydr.-pneum. with/without air motor
Stroke: 1200 mm
Lifting capacity: 14,5 t und 20,0 t
Chassis freely movable / rail-guided on the pit floor


TKS – the all-rounder for your truck and bus workshop and your inspection pit
  • 2-stage telescope pit lift
  • low height and maximum stroke
  • all-purpose use
  • suitable for gearbox and assembly removal
  • smooth running
  • for service, inspection and testing
  • supplement for wheeled gripping equipment and hoists
  • robust finish, floor-running or suspended
Technical details
  • 14,5 t bzw. 20 t load capacity over the entire 1200 mm lifting height
  • quick and safe removal of all assemblies from below
  • pneumatic quick lift until the load is supported and forced post return of both telescope cylinders for shorter cycle times
  • foot operation for qick lifting and load lifting with air motor
  • fully hydraulic operation
  • piston rod and cylinder polished and hard-chrome plated
  • chassis freely movable with polyamide rollers and self-locking when holding a load over 1,2 t
  • chassis rail-guided in L- or U-profiles with needle bearing rollers
Series

TypE

Lifting Capacity

Stroke

Execution

TKS-HS

14,5 / 14,5 t

1.200 mm

suspended

TKS-LM-HS

14,5 / 14,5 t

1.200 mm

suspended, air motor

 

 

 

 

TKS 14/1200 FV

14,5 / 14,5 t

1.200 mm

freely movable

TKS 14/1200 FV-Q

14,5 / 14,5 t

1.200 mm

freely movable and sideways in the chassis

TKS 14/1200 Z

14,5 / 14,5 t

1.200 mm

rail-guided on the bottom of the pit

 

 

 

 

TKS 20/1200 FV

20,0 / 20,0 t

1.200 mm

freely movable

TKS 20/1200 FV-Q

20,0 / 20,0 t

1.200 mm

freely movable and sideways in the chass

TKS 20/1200 Z

20,0 / 20,0 t

1.200 mm

rail-guided on the bottom of the pit

Accessories
TYPe PRODUcT Description Application

ATL 14

cross member for 14 t

200 -  900 mm adjustable

trucks, buses, municipal vehicles

ATL 20

cross member for 20 t

200 -  900 mm adjustable

trucks, buses municipal vehicles

ATB 14

cross member for 14 t

200 -  1040 mm adjustable

trucks, buses

ATB 20

cross member for 20 t

200 -  1040 mm adjustable

trucks, buses

ATB-NF 11

cross member for 11 t

200 -1080 mm adjustable

low-frame buses

ATB-V 16

cross member for 16 t

900 -1500 mm adjustable

low-frame buses, EvoBus etc.

GP 4

gearbox plate

520x350 mm, 45° und 10° pivotable
with wooden chock and retainer straps

gearboxes, assemblies

GP 4A

gearbox plate

700x500 mm, 45° und 10° pivotable, 
with elastomeric base and retainer straps

gearboxes, assemblies

AEF 14

support bridge for 14 t

one-sided open

commercial vehicles for one axle

AEF 20

support bridge for 14 t

one-sided open

commercial vehicles for one axle

AEV 14

support bridge for 14 t

one-sided open, adjustable

commercial vehicles for one axle

AEA 14

support bridge for 14 t

closed

trucks, buses for one axle

AEA 20

support bridge for 20 t

closed

trucks, buses for one axle

ABT LKW 14

support system for 14 t

for lifting and supporting

trucks, buses for one axle

ABT LKW 20

support system for 20 t

for lifting and supporting

trucks, buses for one axle

ABT NF Bus

support system for 11 t

for lifting and supporting

low-frame buses for one axle

AEFK 14

support system for 14 t

for lifting and supporting

trucks, buses, municipal vehicles for one axle

PRG150 carrying plate with rubber surface Ø 150 mm trucks, buses 6-14 t

 

The telescope all-purpose pit lift TKS and its characteristics

This telescope all-purpose pit lift TKS can be used for all purpose. It can be used for repair, maintenance, for working in the inspection pit and for the gearbox removal. As a 2-stage telescope pit lift the telescope all-purpose pit lift has 14,5 t or 20 t load capacity over the entire 1200 mm lifting height. The hydraulic- pneumatic forced post return of both telescope cylinders for shorter cycle times.  The floor-running telescope all-purpose lift has an air motor and pedals for quick and load lifting. Hands are not used for lifting and can be used for working at the vehicle.The free movable chassis (FV) allows to move the pit lift inside and outside the pit and the pit lift can be parked in a niche of the pit. The free and sideways in the carriage movable chassis (FV-Q) allows to move the pit lift in addition sideways in the carriage. The chassis (Z) guides the pit lift on rails with L- and U-profiles on the bottom of the pit. The telescope all-purpose pit lifts TKS –FV and FV-Q and the gearbox lift TKT are freely movable on polyamid rollers and self-locking at 1,2 t load.The chassis (Z) guides the pit lift on rails with L- and U-profiles on the bottom of the pit.

 

Diese Webseite verwendet Cookies, um eine bestmögliche Funktionalität zu gewährleisten. Wenn Sie unsere Webseite nutzen, stimmen Sie der Verwendung von Cookies zu. Ich stimme zu.