Gearbox lift TKT with high structural stability

The gearbox jacks with 2-6 t loading capacity are ideal supplements for wheeled gripping equipment and hoists. They are characterized by ruggedly designed construction and high stability.

 

gearbox lift

 

gearbox lift hanging

Control unit: hydr.-pneum. with / without air motor
Stroke: 1100 mm
Lifting capacity:

2 to, 4 to und 6 to

Chassis: spring-cushioned, self-locking
travelling mechanism


Technical details
  • 2-6 t load capacity over the entire lifting height
  • quick and safe removal of all units from below
  • pneumatic quick lift until the load is supported
  • foot pump for load lift or automatically with air motor
  • fully hydraulic operation piston rod and pump pistons polished and hard-chrome plated
  • special corrosion protection by way of piston rods and cylinders surrounded by oil
  • robust finish with high structural stability by way of spring-cushioned chassis
  • freely movable on polyamid rollers and self-locking at 1,2 t or suspended (HS) in the pit
  • easy operation through ergonomic arrangement of operation elements
Gearbox lift TKT – the ideal supplement for mobile column lifts and hoists
  • very robust and movable
  • suitable for gearbox and assembly removal
  • robust finish
  • ideal supplement for mobile column lifts
  • floor-running or suspended    
Series

Type

load

stroke

execution

TKT 2

2 t

1100 mm

hydr.-pneum., floor-running

TKT-HS 2

2 t

1100 mm

hydr.-pneum., suspended

TKT-LM 2

2 t

1100 mm

hydr.-pneum., floor-running, air motor

TKT-HS-LM 2

2 t

1100 mm

hydr.-pneum., suspended, air motor

 

 

 

 

TKT-LM 4

4 t

1100 mm

hydr.-pneum., floor-running, air motor

TKT-HS-LM 4

4 t

1100 mm

hydr.-pneum., suspended, air motor

 

 

 

TKT-LM 6

6 t

1100 mm


hydr.-pneum., floor-running, air motor

TKT-HS-LM 6

6 t

1100 mm

hydr.-pneum., suspended, air motor

Accessories

TypE

ProduCt

Description

Application

GP 4

gearbox plate

gearbox plate 520x350 mm

45° und 15° swivelled with wooden
chock and retainer straps

gearboxes, assemblies

GP 4A

gearbox plate

gearbox plate 700x500 mm

45° und 15° swivelled with elastomer
rest and
retainer straps

gearboxes, assemblies

ATV

cross member

1,2 t load capacity

for safe lifting at two rests

ATV-TA 1,2

cross member

1,2 t load capacity

for safe lifting at two rests

ATV-TA 1,5

cross member

1,5 t load capaity

for safe lifting at two rests

PRG 120/30

plate

carrying plate with rubber surface

for careful lifting

 

The gearbox jack TKT and its application

The gearbox jacks TKT work fully-hydraulic. Their stroke and pump pistons are hard chrome-plated to protect from wear and corrosion. A special corrosion protection system protects by way of piston rods and cylinders surrounded by oil at every lifting and lowering. The gearbox jack TKT allows a fast and safe removal of all units from below. It has a Lifting capacity of 2, 4 or 6 t, which is assured over the entire lifting height. The chassis of the suspended gearbox jack TKT-HS is rigid or adjustable. The polyamid rollers are needle beared and have an integrated lubricating nipple to allow a movement of the TKT-HS without any effort. The floor-running gearbox jack TKT is robust and movable. It is freely movable on polyamid rollers and self-locking at 1,2 t.
 
 

Diese Webseite verwendet Cookies, um eine bestmögliche Funktionalität zu gewährleisten. Wenn Sie unsere Webseite nutzen, stimmen Sie der Verwendung von Cookies zu. Ich stimme zu.