Universal telescopic pit lifts TKS-HS suspended

The telescope all-purpose pit lift TKS is characterized by an extremely low construction height and simultaneously high stroke.

 

pit jack suspended

Control unit: hydraulic-pneumatic  with / without air motor
Stroke: 1200 mm
Lifting capacity:

14,5 t, 20 t

Chassis: suspended rigid or adjustable


TKS – the all-rounder for your truck and bus workshop and your inspection pit
  • 2-stage telescopic pit lift
  • low height and maximum stroke
  • all-purpose use
  • suitable for gearbox and assembly removal
  • for service, inspection and testing
Technical details
  • 14,5 t or 20 t load capacity over the entire 1200 mm lifting height
  • quick and safe removal  of all units from below
  • pneumatic quick lift until load is supported and forced post return of both telescope cylinders for shorter cycle times
  • foot operation for quick lift and load lift with air motor
  • fully hydraulic operation
  • piston rod and cylinder polished and hard-chrome plated
  • Rollers of the chassis and the lift fitted with needle bearings
Chassis
  • suspended
  • adjustable up to 1000 mm internal width
  • more than 20 t and 1000 mm internal width only rigid welded chassis to the dimensions of the pit
Series

Type

Lifting Capacity

Stroke

Execution

suspended

 

 

 

TKS-HS 14/1200

14,5 / 14,5 t

1.200 mm

suspendedd

TKS-HS-LM 14/1200

14,5 / 14,5 t

1.200 mm

suspended, air motor

TKS-HS 20/1200

20,0 / 20,0 t

1.200 mm

suspended

TKS-HS-LM 20/1200

20,0 / 20,0 t

1.200 mm

suspended, air motor

TKS series also available as floor-running pit lifts

Accessories
TYPe PRODUcT Description Application

ATL 14

cross member for 14 t

200 -  900 mm adjustable

trucks, buses, municipal vehicles

ATL 20

cross member for 20 t

200 -  900 mm adjustable

trucks, buses municipal vehicles

ATB 14

cross member for 14 t

200 -  1040 mm adjustable

trucks, buses

ATB 20

cross member for 20 t

200 -  1040 mm adjustable

trucks, buses

ATB-NF 11

cross member for 11 t

200 -1080 mm adjustable

low-frame buses

ATB-V 16

cross member for 16 t

900 -1500 mm adjustable

low-frame buses, EvoBus etc.

GP 4

gearbox plate

520x350 mm, 45° und 10° pivotable
with wooden chock and retainer straps

gearboxes, assemblies

GP 4A

gearbox plate

700x500 mm, 45° und 10° pivotable, 
with elastomeric base and retainer straps

gearboxes, assemblies

AEF 14

support bridge for 14 t

one-sided open

commercial vehicles for one axle

AEF 20

support bridge for 14 t

one-sided open

commercial vehicles for one axle

AEV 14

support bridge for 14 t

one-sided open, adjustable

commercial vehicles for one axle

AEA 14

support bridge for 14 t

closed

trucks, buses for one axle

AEA 20

support bridge for 20 t

closed

trucks, buses for one axle

ABT LKW 14

support system for 14 t

for lifting and supporting

trucks, buses for one axle

ABT LKW 20

support system for 20 t

for lifting and supporting

trucks, buses for one axle

ABT NF Bus

support system for 11 t

for lifting and supporting

low-frame buses for one axle

AEFK 14

support system for 14 t

for lifting and supporting

trucks, buses, municipal vehicles for one axle

PRG150 carrying plate with rubber surface Ø 150 mm trucks, buses 6-14 t

 

Universal telescopic pit lift TKS-HS and its function.

The telescope pit lift can be used for all purpose. It is used for gearbox removal as well as for repair and maintenance or for work in the inspection pit. The all-purpose lift TKS suspended is a 2-stage telescope lift and has a lifting capacity from 14 to 20 t over the entire lifting height of 1200 mm. The hydraulic- pneumatic plunger return allows a quick return of the piston with and without load and enables a timesaving working. The telescope all-purpose lift TKS is also build as a floor-running type.

 

Diese Webseite verwendet Cookies, um eine bestmögliche Funktionalität zu gewährleisten. Wenn Sie unsere Webseite nutzen, stimmen Sie der Verwendung von Cookies zu. Ich stimme zu.