Pit lifts TKT-HS

The gearbox jack suspended TKT-HS is an ideal supplement for mobile column lifts and hoists. It is characterized by an especially robust construction.

 

pit jack

 

Control unit: hydr.-pneum. without air motor
Stroke: 1100 mm
Lifting capacity:

2 t, 4 t, 6 t

Chassis: suspended, rigid or adjustable


Technical details
  • 2-6 t load capacity over the entire lifting height
  • quick and safe removal of all units from below
  • pneumatic quick lift until the load is supported
  • foot pump for load lift or automatically with air motor
  • fully hydraulic operation piston rod and pump pistons polished and hard-chrome plated
  • special corrosion protection by way of piston rods and cylinders surrounded by oil
  • robust finish with high structural stability by way of spring-cushioned chassis
  • freely movable on polyamid rollers and self-locking at 1,2 t or suspended (HS) in the pit
  • easy operation through ergonomic arrangement of operation elements
Gearbox lift TKT – the ideal supplement for mobile column lifts and hoists
  • very robust and movable
  • suitable for gearbox and assembly removal
  • robust finish
  • ideal supplement for mobile column lifts
  • floor-running or suspended    
Series

Type

load

stroke

execution

TKT 2

2 t

1100 mm

hydr.-pneum., floor-running

TKT-HS 2

2 t

1100 mm

hydr.-pneum., suspended

TKT-LM 2

2 t

1100 mm

hydr.-pneum., floor-running, air motor

TKT-HS-LM 2

2 t

1100 mm

hydr.-pneum., suspended, air motor

 

 

 

 

TKT-LM 4

4 t

1100 mm

hydr.-pneum., floor-running, air motor

TKT-HS-LM 4

4 t

1100 mm

hydr.-pneum., suspended, air motor

 

 

 

TKT-LM 6

6 t

1100 mm


hydr.-pneum., floor-running, air motor

TKT-HS-LM 6

6 t

1100 mm

hydr.-pneum., suspended, air motor

Accessories

TypE

ProduCt

Description

Application

GP 4

gearbox plate

gearbox plate 520x350 mm

45° und 15° swivelled with wooden
chock and retainer straps

gearboxes, assemblies

GP 4A

gearbox plate

gearbox plate 700x500 mm

45° und 15° swivelled with elastomer
rest and
retainer straps

gearboxes, assemblies

ATV

cross member

1,2 t load capacity

for safe lifting at two rests

ATV-TA 1,2

cross member

1,2 t load capacity

for safe lifting at two rests

ATV-TA 1,5

cross member

1,5 t load capaity

for safe lifting at two rests

PRG 120/30

plate

carrying plate with rubber surface

for careful lifting

 

Gearbox jack suspended TKT-HS and its function

The gearbox jack suspended TKT-HS works fully hydraulics. Piston and pump pistons are hard-chrome-plated to protect against mechanical wear. There is a special system in which piston rod and cylinders are all the time surrounded by oil and by the way protected against corrosion. The gearbox jack TKT-HS allows a quick and safe removal of all units from below. It has a lifting capacity of 2, 4 or 6 tonnes, over the entire lifting height. The chassis is rigid or adjustable. The rollers of the chassis are needle beared and have an integrated grease fitting, that allows to move the TKT-HS effortless. The TKT-HS is also available with air motor to lift automatically the load. The gearbos jack TKT-HS is also built as a floor-running version. (Type TKT).

 

Diese Webseite verwendet Cookies, um eine bestmögliche Funktionalität zu gewährleisten. Wenn Sie unsere Webseite nutzen, stimmen Sie der Verwendung von Cookies zu. Ich stimme zu.